Termékek a csomagolás (784)

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 16,0 to 19,0 mm. Strap thickness:0,80-1,27 mm. Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,3 Kg

Semiautomatic mobile strapping machine for the strapping of pallets, complete with a channel for inserting the strap. New compact model with closed body and internal reel holder. Hinged raceway equipped with double roll to facilitate the insertion of the strap into the base of the pallet. Strapping sling channel with containment flaps (avoiding the exit of the strap). Electronic voltage regulation via potentiometer. Electronic regulation of the strap throw length. Safety function with acoustic alarm and tension delay (when the operator inserts the strap he has time to remove the hand). Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:220 V 3 phase Weight:80 Kg

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 0.9. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm. Strap thickness:0,40-0,90 mm. Air pressure:6 bar Air consumpt:14 Lt. / sec Weight:4,9 Kg

Place the pallet on the platform and hook the stretch film to the base then press the start button. The platform begins to rotate, after 2-3 turns operate the button for coil ascent. After reaching the desired height, stop the lifting of the reel and after 2-3 turns stop the machine or operate the descent of the reel and carry out the winding up to the base of the pallet. At the end of wrapping, press the stop button and cut the film. On request we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic scale integrated STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. Maximum load:Kg. 2000 Max pallet height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice. Strap width:Max 32 mm Tension:Max 7500N Weight:3,8 Kg

Self-propelled battery wrapper, suitable for wrapping with stretch film pallets with a maximum height of mm. 2050, also with an irregular shape. However, the base of the pallet must have a regular shape to allow the feeler wheel to follow its shape. Rotating automatically around the pallet, it wraps with stretch film or net. Equipped with rudder for manual steering with forward-reverse buttons, maintenance-free gel traction batteries, built-in battery charger, three-phase electric motors with inverter, height-adjustable guide wheel, front safety bumper. The FP GLOBO model is equipped with a folding arm with reel holder trolley.Keyboard lock Rotation speed adjustable from 5 to 12 rpm Up/down reel carriage speed from 1.3 to 5.4 m/min Turns at the base/top of the pallet from 1 to 10 Pallet height reading delay Film tension adjustment Film pre-stretch adjustment Reel change comfort cycle CYCLES SELECTABLE FROM Weight:Kg. 300 Overall size:mm. 1280x1850x1000h

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal Max. seal length:mm. 300 Seal width:mm. 3 Max. seal thickness:0,15 mm (0,30 tot)

The DSL professional inkjet marker is suitable for marking on porous surfaces (cartons, cartons). Thanks to the external ink tank, it is possible to position the marker on automatic lines and save considerably on consumables and cartridge replacement times. The cartridges contain 420 ml. The cost of printing is about 5 times lower than the other FPA2 series markers. It allows to print alphanumeric texts, logos, date / time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 5,4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages. Resolution:600x300 dpi based on resolution and printing speed Print engine:Hewlett-Packard Thermal Ink Jet Technology Print speed:72 m/min at 300 dpi, horizontal resolution Maximum printing height:12,7 mm (1 row) Minimum printing height:2,7 mm (on several lines) Print distance:6 mm recommended Printable elements:alphanumeric writings, logos, date / time, codes, counter, lot and barcode

PNEUMATIC CLIPPER FOR GABIONS Large sturdy pneumatic clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm (mm. 13 for model FPPS45P-13). Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections. Structure :Steel with rubber handle Charger capacity:100 rings Open ring width (outer):mm 45 Open ring height:mm 24 Opening width:mm 25 Working pressure:5-6 bar Closure internal diameter:mm 15 (mm 13 for model FPPS45P-13)

To be installed at the exit of the packaging machines and welding machines. ROTATING TABLE OF ACCUMULATION WITH STAINLESS STEEL STRUCTURE AND NYLON PLAN The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The rotating tables with nylon plan are available with a diameter of 800, 1200 or 1400 mm, and are suitable for bottles, cans and products that can overturn in the concave or convex turntables. The flat rotating tables can be equipped with loading systems and automatic unloading and thus be used as "accumulation areas" between an automatic machine and another. Edges and sides nylon version Flat turntable with holding sides, polyethylene plan, useful height of 810 mm and a mechanical speed variator. Table top diameter:mm. 800 - 1200 - 1400 Installed power:Kw. 0,18 Standard height of the plan:mm. from 770 to 850

Wrapping machine semi-automatic with turntable mod. FP BOX - TIRES, suitable to the winding of tires coupled with internal diameters from 300 mm to 500 mm. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The machine is equipped with the compressed air device by drive via lever valve for centering and locking of the wheels, consisting of two jaws which are installed on the expansion of extractable pins. To lock and unlock the tires is sufficient to drive the valve lever. The group expansion is raised by about 150 mm. from the plane table. Load:200 Kg Internal tyres diameter:da mm. 300 a 500 (adjustable) Turmtable diameter:Max mm. 1000 Max package dimensions:mm. 800 x 800 x 1000 h Height from the floor:mm. 700 Power:Kw 0,37 Weight:200 Kg Dimensions:1600x1000x1800 h

Semiautomatic bench heat sealers with timer and trimming for bags in PE PP and l - Semiautomatic impulse heat sealers for the bench, for closing PE, PP, PVC and light coupled bags. Equipped with timer, pedal and trimmer. They can be used for: food products, in the automotive, cosmetics, electronics, mechanical and plastic parts, packaging for e-commerce, pellets and agriculture and for chemical products. Available in 460mm and 610mm welding lengths, and 4mm high. Suitable for bags of different thickness, with moist or dusty contents. Double sealing bar with separate regulation of temperatures and times. Manual and semi-automatic operation with electromagnetic closure. Adjustment of the welding power by means of a 6-position switch. Activation by electric pedal or automatic cycle button with digital control of the welding parameters. Digital timer with LCD, for precise control of welding (0-10 sec.) And cooling (0-20 sec.) Times. Can be combined with dosing systems.

Latest generation machine suitable for RESTAURANTS, BUTCHERS, FOOD INDUSTRIES, TRACTORIES and wherever there is the need to vacuum pack both solid and liquid products The AUTOMATIC product recognition system allows you to switch from one production to another without having to change settings. Cooks who work in the kitchen know very well how problematic it is when multiple colleagues have to use the same machine and package different products The color keypad is extremely functional and allows you to change program and vacuum percentage in just a few seconds. Extremely easy to clean vacuum chamber and raised suction. Example model:FP41 RISTO SMART Bar type:1 front mm 410 Machine type:bench Chamber dimensions:mm 417x450x220H (100+120) Vacuum pump: 25 m3/h Num nozzles (gas option):2 Max. bags size:mm 400x500

The SMART inkjet marker is the simplest professional model in the series. It allows printing up to 12.7 mm on porous surfaces (boxes, cases, etc.). It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12.7 mm. The minimum printing height is about 5.4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. Following tests, unlike other cartridges, they proved to be working even after leaving them uncovered for weeks. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (maximum 12,7 mm) and any Word font format. Resolution:600x300 dpi based on resolution and printing speed Print engine:Hewlett-Packard Thermal Ink Jet Technology Print speed:72 m/min at 300 dpi, horizontal resolution Maximum printing height:12,7 mm (on 1 row) Minimum printing height:2,7 mm (on several rows) Print distance:6 mm recommended

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing. Model:MG 621 Max. seal length:mm. 620 Seal width:mm. 3-5 Power:750W Dimensions:cm. 76x20x27 Weight:Kg. 21

Semiautomatic table top sealer with electric pedal and impulse sealing bar (resistance is heated for a few seconds), suitable for closing bags of plastic material heat-sealable. The closing of the sealing bars by pressing the pedal electric with solenoid allows the operator to have both hands free and for increased production, just select the automatic cycle with timed closure. The timers for adjusting the welding and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. Maximum thickness. weldable 0.20 mm. (0.40 mm. Overall) Example model:ME 355 AI Sealing bar lenght:mm. 350 Sealing width:mm. 5 Weldable materials:PE-PP Max thickness weldable:0,20 mm (tot 0,40 mm)

Simple and reliable, it uses paper and polypropylene tapes 29 mm wide and 150 meters long. in the standard version. The machine can be installed on a trolley with motorized reel-holder for rolls of 500-1000 meters. (max. diam. 360 mm). Maximum banding light mm. 450x200H. Speed ​​up to 20 cycles per minute. The tension of the band is adjustable by means of a handwheel positioned inside the wheeled base. Manual or automatic operation with sensor. The FPWK 0230 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales. Available in two models: FPWK0230B: standard bench version with adjustable strap tension via screw located inside the machine. FPWK0230P: version equipped with motorized reel holder with wheels. The strap tension can be adjusted by means of a handle located inside the machine. Usable material:rolls of paper or polypropylene Usable tape width:mm 29 Max. speed:20 cycles/min. Arc size:mm 470 x 210 Max. dimensions bundle to tie:mm. 450 x 200 Max. product weight:kg 10 Band tension:5~40 N

MOTORIZED ROTARY TABLE WITH INTEGRATED ELECTRONIC SCALE Motorized rotary table for manual pallet and packs wrapping, mounted on a compact structure in painted steel that can be forklifted with a transpallet. The external electrical panel is equipped with a support stand. The table is fixed on a weighing platform with 4 load cells. Thanks to the integrated scale with weight indicator, it is possible to weigh the pallets or packages in real time before wrapping. TECHNICAL FEATURES WEIGHT INDICATOR 5-key functional waterproof keyboard 25 mm backlit LCD display. with 6 high-contrast digits and icons to indicate active functions IP54 ABS enclosure, easy to clean and resistant in harsh and corrosive environments Suitable for use on table, column or wall Adjustable angle fixing bracket supplied 24 bit A/D converter, 4 channels, max 200 conv./sec. autoselect and up to 8 signal linearization points Max 10,000e or multifield 3 x 3000e at 0.3 µV/d in version Example model:Rotating platform 1.0-BE Rotary table speed:Variable with inverter 1-3 rpm. (other speeds on request) Maximum load:Kg. 500 Diameter max. pack:mm. 800 Rotary table diameter:mm. 1000

Continuous band sealer suitable for closing horizontal bags with a maximum height mm. 400 and max weight. 5 kg. By using PTFE seal belts, polyethylene, polypropylene, cellophane, paper, aluminum, and other laminates can be sealed. The temperature is controlled by an electronic controller and the speed is adjustable. The distance between the solder and the edge of the bag is 20 mm. The distance (width) between the welding headand the conveyor belt is adjustable and is also adjusted the height of the conveyor belt to the plane of welding. The machine is equipped with a marker rotary heat and interchangeable characters (20 charactersmax height 5 mm.), The system works with inked rollers for easy reading and comes complete withphotocell to make a mark at the desired point. Max products weight:5 Kg Seal width :mm. 10 Seal temperature:0° - 250° Sealable materials:PP –PE-Coupled

PNEUMATIC CLIPPING MACHINE WITH RING LOCK HR24TC PN Pneumatic clipper with ring closure for the assembly of mesh cages, springs for mattresses, fences and packaging. Light and handy. It uses clips type HR24 with width mm 24, height mm 12 and wire diameter mm 1,8 Magazine capacity:120 rings Usage pressure:5,5-7,6 bar Closure diameter:mm 4,8-8,7 Ring type used:HR24ZA-HR24 INOX

Semi-automatic wrapping machine mod. FP BOX with rotating table, suitable for wrapping boxes and small packages. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The standard table has the turntable completely smooth. You can request the non-slip rubber coating or different locking systems of the pack. Current promotion: The FPBOX wrapping machine for boxes is supplied with a free inverter that allows the adjustment of the rotation speed of the rotary table from 10 to 20 rpm Max load weight:200 Kg Turntable diameter:mm. 1000 Max. load size:mm. 800 x 800 x 1000 h Film roll size:manual film diam. max mm. 140 Electrical supply:220 V. 50 Hz Installed power:Kw 0,37 Weight:200 Kg machine size :1600x1000x1800 h

Multifunction counter and floor scales. Capacity from 6 to 600 Kg - Division 2 to 200 grams. MODULAR SCALES FOR COUNTER AND FLOOR "WALL-E" Counter or floor scales complete of multifunction weight indicator FPDFWL BASE 6-digit standard. They have a strong and solid structure and a load of stainless steel. Extremely easy to use and versatile, guaranteeing precision and reliability. They are particularly suitable for the industry and commerce. Available also CE-M APPROVED for sale to third parties, according to OIML R-76/EN 45501. TECHNICAL FEATURES WEIGHING PLATFORM Precise and sturdy structure, suitable for creating scales and automatic weight checking systems for all industrial and commercial applications. Stainless steel top. Standard version works with aluminum cell 3000d with IP65 protection. Example model:FPWET15 Dimensions :mm. 300x300x130 Load max. :Kg. 15 Standard division :gr. 5 Division CE-M:gr. 5

GEM F470 - F520 - F670 CARTON SEALERS WITH MANUAL ADJUSTMENT - AUTOMATIC FLAP CLOSER AND SIDE DRIVE BELTS Carton sealer with manual dimensioning and and automatic flap closer. It folds automatically the four upper flaps and seals with auto-adhesive tape the top and bottom of batches of uniform size, American-type boxes. The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed. The boxes are fed by lateral conveyor belts, driven by a single motor thus optimising even sliding of the boxes and ensuring perfect alignment of the upper and lower flaps which in turn guarantees perfect sealing. Example model:GEM F470 Boxes width min:mm 100 Boxes width max:mm 520 Boxes lenght min:mm 150 Boxes lenght max:mm 600 Boxes eight min:mm 100 Boxes eight max:mm 670 Tape width:mm 50 (75 option) Operation speed:22 m/min Compressed air:6 Bar Air consumption:2,5 Nl

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm. Model:MOD. MG 421 Max. seal length:mm. 420 Seal width:mm. 3-5 Electrical supply:220V Power:600W Dimensions:cm. 56x20x27 Weight:Kg.Kg. 15

PNEUMATIC SEALER SM 40 P - PLASTIC BAND Pneumatic sealer Mod. MINI SM 40 P, robust and safe, built entirely in painted steel suitable for closing polythene bags with clipband (plastic with double metal core). Also available with engraved date or ink date. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. Power supply machine:Pneumatic Air consumption:50 liters/minute Working pressure:6 bar Maximum speed of closing:30 pz./min Size flat clipband:Width 8 mm Thickness 0,6 - 0,8 mm Length 500 - 600 mt

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée. seal length:mm 800 Seal width:mm10 Max. film thickness:mm 0,20 Vacuum pump:20 m³/h Air compressed supply:6 bar Weldable materials:PE-PP-AL/PE

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left. Sealing width:mm. 10 Temperature set:0° - 250° Sealable materials:PP –PE – COUPLED Max product weight:Kg. 3

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES - Structure with double insulation for continuous use without overheating and without risk of burns; - Terminal with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 370 Chamber dimensions:mm 400x370x120/180(H) Vacuum pump:20 m³/h Working cycle:about 30 sec